LSI相关驱动下载地址：http://www.lsi.com/support/Pages/download-search.aspx （搜索型号）
下载好软件上传到ESXi母鸡上：
~ # cd /tmp/
/tmp # ls
scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib
vmware-esx-provider-lsiprovider.vib
~ # cd /tmp/
chmod 777 scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib
chmod 777 vmware-esx-provider-lsiprovider.vib
按照网络上教程安装提示如下错误：
1、开始安装ESXI最新控制器驱动 VMware ESXi 5.0 Driver for LSI MegaRAID SAS Controller
/tmp # esxcli software vib install -v scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib -f --maintenance-mode
[VibDownloadError]
('scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib', '', "[Errno 4] IOError: ")
url = scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib
Please refer to the log file for more details.
按提示把两个文件复制到 /var/log/vmware/
/tmp # cp scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib vmware-esx-provider-lsiprovider.vib /var/log/vmware
然后进入 /var/log/vmware/ 目录
/var/log/vmware # ls
scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib
vmware-esx-provider-lsiprovider.vib
最后执行升级，成功了，很神奇！！！！难道文件一定要放在/var/log/vmware/目录下才可以？但是网络上所有教程都没提到这点。。~~
/var/log/vmware # esxcli software vib install -v scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib -f --maintenance-mode
Installation Result
Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
Reboot Required: true 提示需要重启
VIBs Installed: VMware_bootbank_scsi-megaraid-sas_6.506.51.00.1vmw-1vmw.500.0.0.472560 提示安装版本6.506
VIBs Removed: VMware_bootbank_scsi-megaraid-sas_5.34-4vmw.510.0.0.799733 提示删除旧版本5.34
VIBs Skipped:
再次执行确认已经安装成功
/var/log/vmware # esxcli software vib install -v scsi-megaraid-sas-6.506.51.00.1vmw-1vmw.500.0.0.472560.x86_64.vib -f --maintenance-mode
Installation Result
Message: Host is not changed. 说明版本一致不需要升级
Reboot Required: false
VIBs Installed:
VIBs Removed:
VIBs Skipped: VMware_bootbank_scsi-megaraid-sas_6.506.51.00.1vmw-1vmw.500.0.0.472560
/var/log/vmware #
如上提示说明已经安装成功。
2、安装CIM（MegaRAID SAS VMWare SMIS）
/var/log/vmware # esxcli software vib install -v vmware-esx-provider-lsiprovider.vib -f --maintenance-mode
Installation Result
Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
Reboot Required: true
VIBs Installed: LSI_bootbank_lsiprovider_500.04.V0.34-0012
VIBs Removed:
VIBs Skipped:
/var/log/vmware #
最后在windows上面安装 MegaRAID Storage Management 管理软件，接下去的用法不用多说了跟windows一样：）
虽然 MegaRAID Storage Manager (MSM) 管理工具，届时将会采用“IP Address”进行搜寻 ESXi Host 的动作 (采用 SLP with Multicast 方式)，但是根据实测结果在搜寻及沟通时会用到“DNS 解析”，所以请确认下列事项：
MSM 管理工具主机：
1. Firewall 必须要允许 MSM 管理工具通行 (OpenJDK Platform binary)。
2. MSM 管理工具执行时，必须要确认有带起“UDP Port 3071 / 5571 (javaw.exe 带起)”，否则 MSM 工具无法正常
